Steiner DBAL-D2 Laser

Overview The Steiner DBAL-D2 is a dual-beam aiming laser that offers an IR illuminator and IR laser along with a slaved VIS laser for daytime zeroing. This laser is an eye-safe civilian model, but while the laser is weaker than a full power, the focusable LED-based IR illuminator punches far above its class. There are some downsides with this, however. Because of the larger LED illuminator, the D2 has a bulkier footprint and is quite heavy, and much like the SureFire Vampire series and any other LED IR illuminator, the D2 will have a very dim visible red glow coming from the reflector of the illuminator. The D2 runs off of a single CR123 and can last for 3 hours using both IR illuminator and laser. What’s Included One Steiner DBAL-D2 One Pressure Pad One CR123A Battery Ten 1″x1″ Reflective Zeroing Stickers Specs FEATURES Adjustable LED IR illuminator for better illumination at longer ranges Visible green laser High and low power modes IR LED Illuminator Co-aligned visible & IR aiming lasers Low-profile windage and elevation adjusters Single laser activation switch—tap and release for momentary activation, tap twice for 5 minute continuous ON Activation/low battery indicator light Remote cable port Attaches to any Picatinny rail using the self-adjusting Quick Detach HT Mount Warranty: Covered by Steiner Optics’ manufacturer warranty. Warranty service is provided by Steiner Optics. Made in the USA. View the Technical Manual HERE. Technical Specifications Visible Green Laser Class 3R Output: <5.0 mW; 520nm +/- 10nm IR Laser Pointer IR Class 1 Output: <0.7 mW; 850nm +25/-5nm IR Laser Illuminator Output: 600 mW LED Eye Safe Temperature Range +4°C to +65°C Battery 1x CR123A Battery Life (High IR illum/pnt) ~3 hours Material T6 Aircraft Aluminum Type III Hardcoat Anodized Weight 11.9 oz (337 g) Submersible 5 meters Mount Quick Detach HT Mount Windage & Elevation Adjustment Yes Activation Switch Integrated Push Button Remote Cable Pressure Pad Yes